You should look over all of your gear before you get started to make sure it is all in good working order. If possible, you should have some friends come over to help you. Not only will they be able to help direct the fall of the tree, but they will also be around in case something goes wrong.
10 Tree Removal Techniques You Must Know
While it’s not recommended to cut a tree yourself, if you’re going to proceed, the first thing you should do is assess the risk of the tree falling on anything other than the ground.
You definitely do not want to cut the tree only to have it fall on your house, fence, or worse…a neighbor’s property. Once you are ready to go, you can start following these steps for Tree Removal.
10 Tree Removal Techniques In 2019
- Determine how tall the tree is.
- Based on the height of the tree, decide on the direction you want the tree to fall.
- Clear the area in the fall-zone from any debris or anything that could be damaged.
- Tie one end of the rope to the tree at either the middle or above the middle.
- Hand the other end off to your friends and have them stand outside of the fall-zone at a safe distance.
- Cut a v-shaped notch into the tree on the side you want the tree to fall.
- The notch should be at roughly knee-height, should cut to the center of the tree and should look like a shallow “v”.
- Move to the other side of the tree and start slowly cutting into the tree until you meet your notch cut.
- When the tree starts to fall, quickly walk away from the tree at a 45 degree angle.
- If the tree doesn’t fall over all the way or gets caught on another tree, have your friends start pulling on the rope until the tree finally falls.
With the help of the specialized and efficient tools, the Grapevine Tree Removal service people can do the trimming, cutting and rigging of the trees and give you a clear space or a clean garden.